News:

As an Amazon Associate I earn from qualifying purchases.

Main Menu

baitfish poppers

Started by overbrook, January 26, 2010, 18:17:24 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

overbrook

The first two things you are going to need are size 2/0 popper hooks (I do them in several sizes) and 5/16th inch foam cylanders (match the cylander size to the hook)

Guests are not allowed to view images in posts, please Register or Login

3D prismatic stick on eyes (these are the new jurassic 3D eyes...another great EBAY find)  and some DNA Holofusion (white can be colored)

Guests are not allowed to view images in posts, please Register or Login

clear fish scale tape....

Guests are not allowed to view images in posts, please Register or Login

some black Testors model paint and curtain sheer (can be found in the craft/sewing section at Wal-mart)

Guests are not allowed to view images in posts, please Register or Login

various colors of prismacolor markers

Guests are not allowed to view images in posts, please Register or Login

Poly flake super fine glitter...

Guests are not allowed to view images in posts, please Register or Login

Z-poxy five minute and 30 minute epoxy and disposable brushes (pack of 30 is about a $1 at Wal-mart)

Guests are not allowed to view images in posts, please Register or Login

double edge razors , red t-shirt paint and normal tying tools....scissors, thread and bobbin,bodkin etc.

Guests are not allowed to view images in posts, please Register or Login

start by coating hook shank with thread from just in front of hump to the rear where you will be tying in the tail....

Guests are not allowed to view images in posts, please Register or Login

tie in a generous portion of the DNA Holofusion for the tail (on this size I trim the tail at about an inch long).....

Guests are not allowed to view images in posts, please Register or Login

then using the thread secure the foam cylander down tapering it to the rear.....

Guests are not allowed to view images in posts, please Register or Login

notice the distance left behind the eye of the hook...this is so you can form the cupped face......

Guests are not allowed to view images in posts, please Register or Login

now measure from the rear of the cylander foam body to the eye of the hook....here we have 1 3/4 inches.....

Guests are not allowed to view images in posts, please Register or Login

cut pieces of white 2mm foam the 1 3/4 inches square and fold them in half......

Guests are not allowed to view images in posts, please Register or Login

now where the face is....trim at a slight angle so that when wrapped over the cylander it will give an even face.....

Guests are not allowed to view images in posts, please Register or Login

then along the bottom rear cut a taper from the rear forward to the belly so that when folded over the cylander it will not cover the point of the hook.....

Guests are not allowed to view images in posts, please Register or Login

you should end up with a shape like this.....

Guests are not allowed to view images in posts, please Register or Login

now coat the cylander and thread with super glue and give the 2mm foam a light coat of super glue and fold the 2mm foam over the cylander so the the face is just behind the eye of the hook......

Guests are not allowed to view images in posts, please Register or Login

after securing it correctly at the eye...go to the rear and pich it tight down around the cylander and the hook shank closing any gap.....

Guests are not allowed to view images in posts, please Register or Login

make sure it is tight in the front as well......

Guests are not allowed to view images in posts, please Register or Login

just behind the eye of the hook.....

Guests are not allowed to view images in posts, please Register or Login

also make sure the foam is secured straight up and down so the the body is not "lop sided" with the shank of the hook.....

Guests are not allowed to view images in posts, please Register or Login

the whole body needs to be piched firmly tight to the hook shank....I use needle nose pliers to squeeze it tight while the super glue has time to adhere both sides together....

Guests are not allowed to view images in posts, please Register or Login

as you can see from the slight indentions.....another handy tool would be those heavy metal paper clips with the flat flanges.....then you could clip it along the bottom tight to the hook shank and let it set till the glue has had time to adhere.....

Guests are not allowed to view images in posts, please Register or Login

once dried you then use a sharp razor blade to trim the bottom of the body leaving a bit of a belly from the front just behind the eye towards the rear...trim the rear close (maybe 1/16th of an inch) to the hook shank......

Guests are not allowed to view images in posts, please Register or Login

the next step is to color the mouth with the red t-shirt paint....just dab it all around inside and along the outter edge...

Guests are not allowed to view images in posts, please Register or Login

once the t-shirt paint has had time to dry....its time to color and decorate the poppers....this is the fun part!.....using the prismacolor markers....color the sides (always work from light to dark....and in this case it means bottom to top....

Guests are not allowed to view images in posts, please Register or Login

then add the back color or top color.....

Guests are not allowed to view images in posts, please Register or Login

there are several ways of decorating them....one is to put fish sclae patterns on the back using the curtain sheer....cut a small swatch of the sheer just a little bigger than the popper.....then on a piece of cardboard or something paint a big splotch of paint about the size of the popper....lay the swatch over the paint and brush over it....coating the swatch with paint....when you pick it up blow out any holes filled with paint....then strching it out to the side with both hands ...carefully lay it over the back of the popper and pull it snuggly down about 45 degrees on both sides.....give it a few seconds then lift straight up and you should have a good scale print.....and would'nt ya know it...I slipped a bit...but it still looks O.K.   (takes some practice  LOL).....

Guests are not allowed to view images in posts, please Register or Login

some simple dots down the side add a little pizazz and break up the solid colors......

Guests are not allowed to view images in posts, please Register or Login

you can color fins on and add gills with the red t-shirt paint....(always give the t-shirt paint ample time to dry before handling or moving on)....

Guests are not allowed to view images in posts, please Register or Login

you can color the tails to match the body colors.....

Guests are not allowed to view images in posts, please Register or Login

then I coat the mouths and the area where the eyes are going to go with 5 minute epoxy and before the epoxy sets up...affix the eyes.....

Guests are not allowed to view images in posts, please Register or Login

you can also add some glitter and coat the back giving it a glittery finish.....

Guests are not allowed to view images in posts, please Register or Login

you can add a reverse scale effect with the clear scale tape.....cut it tapered shape to avoid wrinkles down the side....I also like to round out the front a bit....

Guests are not allowed to view images in posts, please Register or Login

then secure it down on the popper.....

Guests are not allowed to view images in posts, please Register or Login

small strips can also be added to the sides for a nice effect.....

Guests are not allowed to view images in posts, please Register or Login

Once all this is done....and everything till now has had time to dry....its time to give a final coat with the 30 minute epoxy....and you're done!

Guests are not allowed to view images in posts, please Register or Login

I truly hope you all enjoy making and fishing these as much as I do!   now go crazy!

Guests are not allowed to view images in posts, please Register or Login


blue ridge angler

awesome tutorial and pattern..
thanks.. 0--0


LivinOnTheFly

Great tutorial, it's high time i quit buying poppers! ;hb

Not at the table Carlos!

WRector

Overbrook,

The Tutorial is awesome!  Thanks for putting it together  0--0

There's a big difference between a dry fly dancing through
a riffle and a weighted fur ball dragging on the bottom.

cypresstrout

Mr. Overbrook, I have heard through the grapevine that you can flat out tie a hair bug.  ;D   Show us some of those.   


tbird4

wow! ;hb
Thanks man, got to try this out.


overbrook

Quote from: cypresstrout on January 26, 2010, 23:21:14 PM

Mr. Overbrook, I have heard through the grapevine that you can flat out tie a hair bug.  ;D   Show us some of those.

Have'nt spun much hair since last summer or fall....but here's a few of them.....

Guests are not allowed to view images in posts, please Register or Login

Guests are not allowed to view images in posts, please Register or Login
Guests are not allowed to view images in posts, please Register or Login
Guests are not allowed to view images in posts, please Register or Login
Guests are not allowed to view images in posts, please Register or Login
Guests are not allowed to view images in posts, please Register or Login
Guests are not allowed to view images in posts, please Register or Login
Guests are not allowed to view images in posts, please Register or Login
Guests are not allowed to view images in posts, please Register or Login
Guests are not allowed to view images in posts, please Register or Login
Guests are not allowed to view images in posts, please Register or Login

0--0


LivinOnTheFly

Alright...quit posting pictures. You're putting us all to shame! ;hb Awesome flies man. I wanna be like you when I grow up   0--0

Not at the table Carlos!

blue ridge angler

Quote from: LivinOnTheFly on January 27, 2010, 11:52:11 AM

Alright...quit posting pictures. You're putting us all to shame! ;hb Awesome flies man. I wanna be like you when I grow up   0--0

x2 0--0

trouthead

Great looking deer hair bugs. Definitely puts mine to shame.  8@S


croaker

Quote from: overbrook on January 27, 2010, 11:36:30 AM

Quote from: cypresstrout on January 26, 2010, 23:21:14 PM

Mr. Overbrook, I have heard through the grapevine that you can flat out tie a hair bug.  ;D   Show us some of those.

Have'nt spun much hair since last summer or fall....but here's a few of them.....

Guests are not allowed to view images in posts, please Register or Login

Guests are not allowed to view images in posts, please Register or Login
Guests are not allowed to view images in posts, please Register or Login
Guests are not allowed to view images in posts, please Register or Login
Guests are not allowed to view images in posts, please Register or Login
Guests are not allowed to view images in posts, please Register or Login
Guests are not allowed to view images in posts, please Register or Login
Guests are not allowed to view images in posts, please Register or Login
Guests are not allowed to view images in posts, please Register or Login
Guests are not allowed to view images in posts, please Register or Login
Guests are not allowed to view images in posts, please Register or Login

0--0

Show off!
How about some half dollar size spun hair flys ;D

-you can't conquer a free man; the most you can do is kill him.  Robert A. Heinlein.

overbrook

Croaker....I don't have a rod big enough and with enough backbone to throw the monsters your talkin about....but hopin Smokey is gonna hook me up soon! thinkin along the lines of a 10' 8 or 9 wt tip flex  8)


fish_junkie

Fly Fish Stoned

Support the BRFFF