• Welcome to Pretentious Snobby Bastard Fly Fishing!. Please login or sign up.
November 15, 2019, 08:44:40 am

News:

NC Delayed Harvest Trout Waters Open to Harvest June 1, 2019


+-+-

+-User

Welcome, Guest.
Please login or register.
 
 
 
Forgot your password?

+-Stats

Members
Total Members: 2320
Latest: burgessbart
New This Month: 0
New This Week: 0
New Today: 0
Stats
Total Posts: 146487
Total Topics: 14158
Most Online Today: 513
Most Online Ever: 1192
(October 24, 2019, 18:08:19 pm)
Users Online
Members: 9
Guests: 481
Total: 490

Silver Butcher wet

Started by troutphisher, April 12, 2006, 20:55:57 pm

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

troutphisher

April 12, 2006, 20:55:57 pm Last Edit: October 20, 2006, 23:57:34 pm by troutphisher
Hook: Mustad 3906B #14

Thread: Black UNI-Thread 8/0

Body: Silver flat mylar tinsel

Rib:    Silver ultra wire

Legs: Black hackle fibers 

Wing: Matched mallard blue slips

Tail:   Red hackle fibers

The object of life is not to be on the side of the majority, but to escape finding oneself in the ranks of the insane.

shanktrout

Great fly... traditional wets get me pumped

phg

Wet flys will have a large-ish head because that's where the butt ends of the wings are tied down.  That said your's may be a bit larger than is desirable, but not bad.  Silver wire is an acceptable substitute for silver oval tinsel.  A thin piece of mono will also work, you are just trying to give texture to an otherwise smooth body.

Nice fly.  Now let's see what the trout think of it....

plumbob

Nice looking fly, and a real nice job on setting the wings. You can get a much smaller head by tying your throat hackles in differently. It looks like you took some hackles and tyed them on the bottom which is fine but to get a smaller head you should wrap it as a collar and pull the fibers down,and then ty your wing down right in front of the collar. Its hard to explain once you see it done you'll understand.

troutphisher

Plumbob:
your right, I was going to wind the hackle tip to reduce the head size, but I didn't have size 16 or 14 hackle.
So I tied it in beard style under the eye, if I would have had the right size, two maybe three winds, then pull the hackle into position under the hook would have produced a smaller clump. Next time I will use that method.

Thanks.
The object of life is not to be on the side of the majority, but to escape finding oneself in the ranks of the insane.

shanktrout

April 13, 2006, 21:20:29 pm #5 Last Edit: April 13, 2006, 21:23:54 pm by shanktrout
To be honest... I kind of like the big head look as long as it is tapered and on a sub surface pattern... call me crazy... but big heads say one thing to me...durability!

Here's a softhackled streamer I tied up with a nice big ol glossy head recently:


plumbob

Troutphisher, know what you mean about finding a small enough hackle. And for the most part I would tie all my fishing flys the same as you did, one other thing to watch is make your head wraps with the twist taken out of the thread so it will lay flatter. You tend to try to keep putting on head laquer to try to smooth the thread wraps when all your going to do is create more bulk to the head.Flat thread will give a smooth finish with less bulk, drop of head cement and your good to go.


+-Recent Topics

For Keith by croaker
November 14, 2019, 19:26:45 pm

Not so local steelheads by Dougfish
November 14, 2019, 17:41:11 pm

Lamsom Speester 4 reel by Woolly Bugger
November 14, 2019, 16:42:41 pm

Permanent Amazon Link by Woolly Bugger
November 14, 2019, 10:58:07 am

4 more years by Yallerhammer
November 14, 2019, 09:32:43 am

Smith-Continued by Woolly Bugger
November 13, 2019, 20:43:22 pm

Subaru Forester ? by troutrus
November 13, 2019, 10:19:53 am

Grizzlies. Git outside! by Dougfish
November 12, 2019, 21:29:27 pm

Albies 2019 - round two - OK... boomer! by troutrus
November 12, 2019, 20:54:14 pm

Beetle's Book and Word Thread by Dee-Vo
November 12, 2019, 19:51:27 pm

Powered by EzPortal